Lenovo Storage Array 8332 User Manual

-Secure Managed ClientStorage Array User GuideMachine Type 8332

2 User Guide

Chapter 2. Features Figure 1 shows a front view of the Secure Managed Client (SMC) - Storage Array while Figure 2 shows a rear v

Enclosure subsystem The SMC - Storage Array design concept is based on an enclosure subsystem together with a set of plug-in module

1Front panel 2Drive bays 3Rack retaining screw 4Rack retaining screw Enclosure chassis The chassis is installed with 48.26-cm (1

8.89-cm (3.5-inch) form factor drive. In addition, two 6.35-cm (2.5-inch) boot drives can be installed in the boot drive module.Note

1PS2 mouse port 9Bit 2 (POST LED) 2System status LED 10LSB (POST LED) 3MSB (POST LED) 11Video port 4Bit 1 (POST LED)

3On/off switch 7Reset button (recessed) 4ID LED activation switch Table 1. Functions of front operator's panel LEDs and

Power supply unit voltage operating ranges are nominally 100V - 240V AC, selected automatically. The PSU has an audible alarm to in

Airflow is front to rear with cooling air being drawn across the drives, through the fans and pressurizing the rear of the enclos

Drive status indicator Disk drive status, under ESI processor control, is monitored by two LEDs (a green LED and an amber LED) mou

12 User Guide

Chapter 3. Getting Started In this chapter, you are shown how to plan and install your Secure Managed Client (SMC) - Storage Array

The SMC - Storage Array subsystem is housed in a 4 x 3 enclosure (four drive bays wide by three bays high). The top bays are

Planning and configuring your installation Refer to “Planning your installation” on page 13 for information on overall system configur

CAUTION: Operation of the enclosure system with any modules missing will disrupt the airflow and the drives will not receive suffici

7. Return enclosure to fully home position and attach to rack using captive fasteners on front flanges.Note: Rack rails have fea

18 User Guide

Chapter 4. Operation Before powering on the Secure Managed Client (SMC) - Storage Array ensure that all modules are firmly seated i

Front operator's panel LEDs and switches The front operator’s panel LED fault and status conditions are defined in Table 4. Fun

Starting the drives Unless otherwise selected during installation, all drives in the enclosure should automatically start their motors

Secure M anaged Client - Sto rag e Array User Gui de

1. Carefully insert the TORX screwdriver provided into the cutout in the handle (see 1 in Figure 20). 2. Rotate the screwdriv

Chapter 5. Troubleshooting and problem solving The Secure Managed Client (SMC) - Storage Array includes an enclosure services processo

Table 6. Power supply unit LED states Condition LED state No AC power to all PSUs Off Power supply direct current (DC) outputs ON

Cooling fan LEDs An amber LED incorporated in each cooling fan monitors its status. Constant On indicates a fault condition. . Drive

Table 10. NIC LEDs LED LED state Description Left Off No network connection is in place Solid green Active network connection is in

Table 11. Light and buzzer interpretations (continued) LED/buzzer State Related Meaning Action Fast blink (alternating every half second

Table 11. Light and buzzer interpretations (continued) LED/buzzer State Related Meaning Action Faster beep (1.5 seconds beep, 0.5 second

Cooling fan faults Table 14. Cooling fan faults Symptom Cause Action 1. Front panel fault LED amber 2. Audible alarm sounding 3.

Table 15. Thermal cooling (continued) Symptom Cause Action 1. Front operator's panel unit fault LED amber. 2. An amber LED is

CAUTION: Observe all conventional ESD precautions when handling modules and components. Avoid contact with backplane components and mod

Note Before using this information and the product it supports, be sure to read the Safety and Warranty Guide that came with this

32 User Guide

Chapter 6. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult you

Any performance data contained herein was determined in a controlled environment. Therefore, the result in other operating environment

Part Number: 45K1342 Printed in USA (1P) P/N: 45K1342

Contents Introduction . . . . . . . . . . . . .v Product contents, order options, and accessories . .v Chapter 1. Important s

iv User Guide

Introduction The Secure Managed Client (SMC) - Storage Array is a 2U (rack space) disk drive enclosure, currently housing 12 low-pro

vi User Guide

Chapter 1. Important safety information CAUTION: Before using this manual, it is important that you read and understand all the rela