Lenovo C225 All-In-One User Manual download pdf (Page 17)

Hardware Replacement Guide

Replacing the optical drive

Attention:

Turn off the computer and wait 3 to 5 minutes to let it cool down before

replacing the optical drive.

To remove the optical drive:

Note: Itmaybehelpfultoplacethecomputerface-downonasoftatsurface

for this procedure. Lenovo recommends that you use a blanket, towel, or

other soft cloth to protect the screen from scratches or other damage.

1. Remove any media (disks, CDs, or memory cards) from the drives, shut down

the operating system, and turn off the computer and all attached devices.

2. Unplug all power cords from electrical outlets.

3. Disconnect all cables attached to the computer. This includes power cords,

input/output (I/O) cables, and any other cables that are connected to the

computer. Refer to “Left and right views” and “Rear view” for help with locating

the various connectors.

4. Remove the rubber cap that protects the screw.

5. Remove the screw that secures the optical drive to the chassis.

6. Pushtheopticaldrivesothatitslidesoutofthedrivebay.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

No comments

Lenovo C225 All-In-One User Manual Page 17