Lenovo H430 Desktop User Manual download pdf (Page 49)

Chapter 9. Replacing hardware

5. Slide the new optical drive into the bay from the back until it snaps into

position.

6. Screw the two screws back into place in the drive bay.

7. Connect the data and power cables to the drive.

8. Install the front bezel. Refer to “Removing and replacing the front bezel”.

9. Refer to the “Completing the installation”.

Replacing a PCIE adapter

Attention

Do not remove the computer cover or attempt any repairs before

reading the “Important safety information” in the Safety and Warranty

Guide that was included with your computer or in the Hardware

Maintenance Manual (HMM) for the computer. To obtain copies of the

Safety and Warranty Guide or HMM, go to the Support Web site at:

http://consumersupport.lenovo.com

The following procedure can be used for removing any PCIE adapters,

including Graphic Cards, TV-tuner Card and Wiﬁ Cards.

To replace an adapter:

1. Remove the computer cover. Refer to “Removing the computer cover”.

2. Remove the screw that secures the latch to the chassis,

open the

adapter latch

, and remove the adapter by pulling it straight out of

the adapter connector.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 65 66

No comments

Lenovo H430 Desktop User Manual Page 49