Lenovo IdeaCentre K220 User Manual download pdf (Page 24)

Chapter 5. Using the Setup Utility

the F12 key rather than leaving it pressed when turning on the

computer.

3. Select the desired startup device from the Startup Device Menu and

press Enter to begin.

Note: Selecting a startup device from the Startup Device menu does

not permanently change the startup sequence.

Selecting or changing the startup device sequence

To view or permanently change the conﬁgured startup device sequence,

do the following:

1. Start the Setup Utility program (see “Starting the Setup Utility program”

on page 16).

2. Select Advanced BIOS Features.

3. Select the devices for the 1st Boot Device, the 2nd Boot Device, the 3rd

Boot Deviece and the 4th Boot Device.

4. Press ESC to return the Advanced BIOS Features and then Save

changes and Exit.

If you have changed these settings and want to return to the default

settings, select Load Optimal Defaults on the Setup Utility menu.

Exiting from the Setup Utility program

When you ﬁnish viewing or changing settings, press Esc to return to the

Setup Utility program menu (you might have to press Esc several times).

If you want to save the new settings, select Save changes and Exit before

you exit. Otherwise, your changes will not be saved.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

No comments

Lenovo IdeaCentre K220 User Manual Page 24