Lenovo B550 User's Guide download pdf (Page 52)

User Guide

Replacing a memory module

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool

down before removing the cover.

Note: It may be helpful to place the computer face-down on a soft ﬂat

surfaceforthisprocedure.Lenovorecommendsthatyouuseablanket,

towel, or other soft cloth to protect the touch screen from scratching or

other damage.

1. Remove any media (disks, CDs, or memory cards) from the drives, shut down

the operating system, and turn off the computer and all attached devices.

2. Unplug all power cords from electrical outlets.

3. Disconnect all cables attached to the computer. This includes power cords,

input/output (I/O) cables, and any other cables that are connected to the

computer. Refer to “Left and right view” and “Rear view” for help with locating

the various connectors.

4. Remove the computer cover. Refer to “Removing the computer cover”.

5. Push out the latches on both sides of the memory socket to release the memory

module and gently pull the memory module upward to remove it from its socket.

All of the memory modules can be removed by using the same procedure.

6. Align then insert the new memory module into the socket and push down on

the top edge of the memory module. Make sure the latches lock the memory

module in place.

7. Align then slide the computer cover back into position.

31504337 IC B550-555 UG V1.0 (Win8)(EN)(R).indb 47 2013-5-27 10:32:21

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 62 63

No comments

Lenovo B550 User's Guide Page 52