Lenovo Personal Computer 4263 User Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 92
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
7. Follow this sequence to remove the four screws that secure the heat sink and
fan assembly to the system board:
a. Partially remove screw 1, then fully remove screw 2, and then fully
remove screw 1.
b. Partially remove screw 3, then fully remove screw 4, and then fully
remove screw 3.
Note: Carefully remove the four screws from the system board to avoid any
possible damage to the system board. The four screws cannot be
removed from the heat sink and fan assembly.
8. Carefully lift the heat sink and fan assembly off the system board.
Notes:
a. You might have to gently twist the heat sink and fan assembly to free it
from the microprocessor.
b. Do not touch the thermal grease while handling the heat sink and fan
assembly.
9. Remove the plastic cover from the bottom of the new heat sink and fan
assembly to expose the thermal grease (this cover protects the thermal grease
from contamination).
Notes:
a. Do not remove the plastic cover until you are ready to install the heat sink
and fan assembly on the microprocessor.
b. Do not touch the thermal grease on the heat sink and fan assembly.
c. Do not put the heat sink and fan assembly anywhere except on the
microprocessor after the plastic cover has been removed and the thermal
grease exposed.
Figure 28. Removing the heat sink and fan assembly
Chapter 2. Installing or replacing hardware 33
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 91 92

Comments to this Manuals

No comments