Lenovo THINK CENTRE 9159 User Manual download pdf (Page 29)

5. Install the new drive into the blue bracket, flex the bracket, and align the pins

1 through 4on the bracket with the holes in the hard disk drive. Do not

touch the circuit board 5 on the bottom of the hard disk drive.

6. Position the hard disk drive and bracket so that it engages the retaining clips

in the bottom of the chassis when you slide the bracket to the right.

7. Slide the hard disk drive and bracket to the right until it snaps into position.

8. Connect the signal and power cables to the rear of the hard disk drive.

Figura 22. Removing the hard disk drive

Figura 23. Aligning the pins with the holes in the hard disk drive

Capitolo 3. Installing options and replacing hardware 21

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

No comments

Lenovo THINK CENTRE 9159 User Manual Page 29