Lenovo 6528 User Manual download pdf (Page 182)

v Follow the suggested actions in the order in which they are listed in the Action column until the problem

is solved.

v See the ″Parts Listing″ section in the Hardware Maintenance Manual to determine which components are

customer replaceable units (CRU) and which components are field replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Memory DIMM Configuration Error

for All DIMMs on Memory Subsystem

All DIMMs.

Error A DIMM configuration error

has occurred.

Make sure that DIMMs are

installed in the correct sequence

and have the same size, type,

speed, and technology.

Memory uncorrectable error detected

for DIMM One of the DIMMs on

Memory Subsystem One of the

DIMMs.

Error A memory uncorrectable

error has occurred.

1. If the server failed the POST

memory test, reseat the

DIMMs.

2. Replace any DIMM that is

indicated by a lit error LED.

Note: You do not have to

replace DIMMs by pairs.

3. Run the Setup utility to enable

all the DIMMs.

4. Run the DSA memory test.

Memory Logging Limit Reached for

DIMM One of the DIMMs on Memory

Subsystem One of the DIMMs.

Error The memory logging limit

has been reached.

1. Update the server firmware to

the latest level.

Important: Some cluster

solutions require specific code

levels or coordinated code

updates. If the device is part

of a cluster solution, verify

that the latest level of code is

supported for the cluster

solution before you update

the code.

2. Reseat the DIMMs and run

the DSA memory test.

3. Replace any DIMM that is

indicated by a lit error LED.

Memory DIMM Configuration Error

for One of the DIMMs on Memory

Subsystem One of the DIMMs.

Error A DIMM configuration error

has occurred.

Make sure that DIMMs are

installed in the correct sequence

and have the same size, type,

speed, and technology.

Memory uncorrectable error detected

for DIMM n Status on Memory

Subsystem DIMM n Status.

(n = DIMM number)

Error A memory uncorrectable

error has occurred.

1. If the server failed the POST

memory test, reseat the

DIMMs.

2. Replace any DIMM that is

indicated by a lit error LED.

Note: You do not have to

replace DIMMs by pairs.

3. Run the Setup utility to enable

all the DIMMs.

4. Run the DSA memory test.

5. (Trained service technician

only) Replace the system

board.

166 ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide

1 ... 181 182 183 ... 216

Comments to this Manuals

No comments

Lenovo 6528 User Manual Page 182

Comments to this Manuals

Related products and manuals for Computers Lenovo 6528