Lenovo 59415169 Specifications download pdf (Page 35)

Lenovo G50-30/G50-45/G50-70/G50-70m/Z50-70/Z50-75

FRU replacement notices

Thissectionpresentsnoticesrelated to removingand replacingparts.Read

thissectioncarefullybeforereplacinganyFRU.

Screw notices

Loosescrewscancauseareliabilityproblem. In theLenovocomputer,this

problemisaddressedwithspecialnylon-coatedscrewsthathavethefollowing

characteristics:

• Theymaintaintightconnections.

• Theydonoteasilycomeloose,evenwithshockorvibration.

• Theyarehardertotighten.

• Eachoneshouldbeusedonlyonce.

Dothefollowingwhenyouservicethismachine:

• Keepthescrewkitinyourtoolbag.

• CarefullyremovescrewsforreusewhenreplacingFRUs.

• Useatorquescrewdriverifyouhaveone.

Tightenscrewsasfollows:

•

Plastic to plastic

 Turnanadditional 90° after thescrewheadtouches the surfaceofthe

plasticpart:

more than 90°

(Cross-section)

•

Logic card to plastic

 Turnanadditional180°afterthescrewhead touches the surface of the

logiccard:

more than 180°

(Cross-section)

•

Torque driver

 Ifyouhaveatorquescrewdriver,refertothe“Torque”columnforeachstep.

• Makesurethatyouusethecorrectscrews.Ifyouhaveatorquescrewdriver,

tightenallscrewsrmlytothetorqueshowninthetable.

Carefully remove

screws for reuse when replacing FRUs. Make sure that all screws are

tightened rmly.

• Ensuretorquescrewdriversarecalibrated correctly followingcountry

specications.

1 ... 34 35 36 ... 93

No comments

Lenovo 59415169 Specifications Page 35