Lenovo G50-45 Specifications download pdf (Page 35)

Lenovo G50-30/G50-45/G50-70/G50-70m/Z50-70/Z50-75/G50-80

FRU replacement notices

Thissection presentsnoticesrelatedtoremoving andreplacingparts. Read

thissectioncarefullybeforereplacinganyFRU.

Screw notices

Loosescrewscancause areliability problem.IntheLenovocomputer,this

problemisaddressedwithspecialnylon-coatedscrewsthathavethefollowing

characteristics:

• Theymaintaintightconnections.

• Theydonoteasilycomeloose,evenwithshockorvibration.

• Theyarehardertotighten.

• Eachoneshouldbeusedonlyonce.

Dothefollowingwhenyouservicethismachine:

• Keepthescrewkitinyourtoolbag.

• CarefullyremovescrewsforreusewhenreplacingFRUs.

• Useatorquescrewdriverifyouhaveone.

Tightenscrewsasfollows:

•

Plastic to plastic

 Turnanadditional90° afterthe screwhead touchesthe surfaceof the

plasticpart:

more than 90°

(Cross-section)

•

Logic card to plastic

 Turnan additional180°afterthescrewheadtouchesthesurfaceofthe

logiccard:

more than 180°

(Cross-section)

•

Torque driver

 Ifyouhaveatorquescrewdriver,refertothe“Torque”columnforeachstep.

• Makesurethatyouusethecorrectscrews.Ifyouhaveatorquescrewdriver,

tightenallscrewsrmlytothetorqueshowninthetable.

Carefully remove

screws for reuse when replacing FRUs. Make sure that all screws are

tightened rmly.

• Ensuretorque screwdriversarecalibratedcorrectlyfollowing country

specications.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 95 96

No comments

Lenovo G50-45 Specifications Page 35