Lenovo IdeaPad S10 User Manual download pdf (Page 85)

6. If an SO-DIMM is already installed in the memory slot, remove it to make room

for the new one by pressing out on the latches 1 on both edges of the socket at

the same time, and pulling out the SO-DIMM 2. Be sure to save the old

SO-DIMM for future use.

7. With the notched end of the SO-DIMM toward the contact edge side of the

socket, firmly insert the SO-DIMM into the socket at an angle of about 20

degrees 1; then pivot it downward until it snaps into place 2.

Chapter 5. Upgrading and replacing devices 77

1 ... 84 85 86 ... 180

No comments

Lenovo IdeaPad S10 User Manual Page 85