Lenovo IdeaPad U110 User Manual download pdf (Page 47)

Chapter 2. Using Your Computer

Note:

Make sure the Password Check is set to Always if you need the password

protection at power on. If password have been set, the Supervisor

Password will show Installed; otherwise it will show Not Installed.

To set a User Password:

Only Supervisor password have been set, User password can be set.

1 Turn on your computer. Press F2, while the initial screen is displayed.

The BIOS Setup Utility screen opens.

2 Select Security, using the cursor directional keys.

3 Select Set User Password, and press the Enter key. The Set User

Password window opens.

4 Choose your User password, which can be from one to eight

alphanumeric characters in any combination. Type it in the Enter New

Password field.

5 Press the Enter key once to move to the Confirm New Password field.

Retype the password you just entered to verify it.

6 Commit your password to memory, and press the Enter key.

7 Press F10 to exit.

8 Select OK in the Setup Confirmation window.



1 ... 46 47 48 ... 129

No comments

Lenovo IdeaPad U110 User Manual Page 47