Lenovo LT2423 User's Guide download pdf (Page 18)

Preparing the monitor for wall-mounting

WARNING: To

reduce the risk of personal injury or of damage to the eq

uipment, check

that the wall-mounting fixture is adequately installed and secured before attaching the

monitor. Refer to the instructions supplied with the wall-mounting fixture and check

that it is capable of supporting the monitor.

1.Disconnect the power cable and any other cables from the monitor.

2.Place the monitor face down on a flat, protected surface.

3.Remove the monitor base from stand.

4.Remove the three

screws in the monitor stand. Lift the monitor stand off the monitor.

5.Four thre

aded holes are exposed. These holes are for screws to a

ttach the swing arm

or other mounting fixture to the back of the monitor.

6.Follow the instructions included with the mounting fixture to ensure that the

monitor is safely attached.

7.Attach a swing arm or other mounting fixture.

NOTE: For use only with UL(expand UL) Listed Wall Mount Bracket with minimum

weight/load bearing capacity of

3.7

kg.

2-8 Flat Panel Monitor User’s Guide

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

No comments

Lenovo LT2423 User's Guide Page 18