Lenovo LT3053P User Manual download pdf (Page 7)

Chapter 1. 1-3

To uninstall the monitor shading hood, please see the illustration below.

1. Remove the shading hood from the monitor.

2. Turn the shading hood upside down.

3. Unlock the hooks of hood cover by pushing the hood leaf in the direction of arrow as

indicated in Picture 6. Repeat the same procedure (Picture 5 and 6) to the other hood leaf .

4. Detach the hood leafs from the hood cover .

5. Shading hood uninstalled. Please store the hood leafs and hood cover in safe place where

children cannot reach.

1.The window cover on the top of the shading hood is specially designed for the use of color

calibrator.

2. To set up the color calibrator, user needs to first open the window cover on the top of the

shading hood, then push the calibrator wire through the rectangular hole.

Note:Pay attention to the following advices when using the monitor shading hood.

1. Do not carry the monitor with the hood attached to monitor. While carrying the monitor, the

hood may fall or slip off, which may result in injury or equipment damage.

2. Make sure the open/close cover is closed properly. If the cover is not closed properly, the

ventilation slots on the monitor will be blocked and there will not be sufficient airflow for

temperature regulation. This may cause overheating inside the monitor and may result in

fire, electric shock, or equipment damage.

3. Do not place any object on the hood. If the hood falls or slips off or the monitor falls over, it

may result in injury or equipment damage.

4. Do not rotate the monitor screen while the hood is attached. Doing so may cause the hood to

slip off, which may result in injury or equipment damage.

1 2 3 4 5 6 7 8 ... 45

No comments

Lenovo LT3053P User Manual Page 7