Lenovo AD80582QH056003 Datasheet Page 97
- Page / 136
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Intel® Xeon® Processor 7400 Series Datasheet 97
Thermal Specifications
6.1.2 Thermal Metrology
The minimum and maximum case temperatures (T
CASE
) are specified in Table 6-2
through Table 6-5, and are measured at the geometric top center of the processor
integrated heat spreader (IHS). Figure 6-6 illustrates the location where T
CASE
temperature measurements should be made. For detailed guidelines on temperature
measurement methodology, refer to the Intel® Xeon® Processor 7400 Series Thermal
Mechanical Design Guide.
Note: Figure is not to scale and is for reference only.
6.2 Processor Thermal Features
6.2.1 Intel® Thermal Monitor Features
Intel® Xeon® Processor 7400 Series provide two thermal monitor features, Intel®
Thermal Monitor (TM1) and Enhanced Thermal Monitor (TM2). The TM1 and TM2 must
both be enabled in BIOS for the processor to be operating within specifications. When
both are enabled, TM2 will be activated first and TM1 will be added if TM2 is not
effective.
6.2.2 Intel Thermal Monitor
The Intel Thermal Monitor (TM1) feature helps control the processor temperature by
activating the Thermal Control Circuit (TCC) when the processor silicon reaches its
maximum operating temperature. The TCC reduces processor power consumption as
needed by modulating (starting and stopping) the internal processor core clocks. The
Intel Thermal Monitor or Enhanced Thermal Monitor (Thermal Monitor 2) must be
enabled for the processor to be operating within specifications. The temperature at
which Thermal Monitor activates the thermal control circuit is not user configurable and
Figure 6-6. Case Temperature (T
CASE
) Measurement Location
Measure T
CASE
at this point
(geometric center of IHS)
Thermal grease should cover
entire area of IHS
Measure from edge of IHS
53.34 mm FC-mPGA8 Package
19.25 mm [0.76 in]
19.25 mm [0.76 in]
Measure T
CASE
at this point
(geometric center of IHS)
Thermal grease should cover
entire area of IHS
Measure from edge of IHS
53.34 mm FC-mPGA8 Package
19.25 mm [0.76 in]
19.25 mm [0.76 in]
- Datasheet 1
- Contents 3
- Revision History 7
- 1 Introduction 9
- 1.1 Terminology 11
- Introduction 12
- 1.2 State of Data 13
- 1.3 References 13
- 2 Electrical Specifications 15
- 2.2 Decoupling Guidelines 16
- Clocking 16
- 2.3.2 PLL Power Supply 18
- Electrical Specifications 20
- Table 2-4. FSB Signal Groups 21
- Asynchronous Signals 22
- 2.9 Mixing Processors 23
- Time Duration (s) 28
- Sustained Current (A) 28
- Table 2-10. V 30
- Figure 2-4. V 31
- 2.11.2 V 33
- Overshoot Specification 33
- 2.11.3 Die Voltage Validation 33
- 2.11.4.1 DC Characteristics 34
- 2.12 AGTL+ FSB Specifications 35
- Tp = T1: BCLK[1:0] period 42
- THERMTRIP# 46
- System bus 48
- FERR#/PBE# 48
- Figure 2-22. VID Step Timings 49
- 3 Mechanical Specifications 51
- Mechanical Specifications 52
- 3.7 Processor Materials 61
- 3.8 Processor Markings 62
- Processor 63
- 4 Pin Listing 65
- (Sheet 3 of 16) 66
- (Sheet 4 of 16) 66
- (Sheet 5 of 16) 67
- (Sheet 6 of 16) 67
- (Sheet 7 of 16) 68
- (Sheet 8 of 16) 68
- (Sheet 9 of 16) 69
- (Sheet 10 of 16) 69
- (Sheet 11 of 16) 70
- (Sheet 12 of 16) 70
- (Sheet 13 of 16) 71
- (Sheet 14 of 16) 71
- (Sheet 15 of 16) 72
- (Sheet 16 of 16) 72
- (Sheet 1 of 14) 73
- (Sheet 2 of 14) 73
- (Sheet 3 of 14) 74
- (Sheet 4 of 14) 74
- (Sheet 5 of 14) 75
- (Sheet 6 of 14) 75
- (Sheet 7 of 14) 76
- (Sheet 8 of 14) 76
- (Sheet 9 of 14) 77
- (Sheet 10 of 14) 77
- (Sheet 11 of 14) 78
- (Sheet 12 of 14) 78
- (Sheet 13 of 14) 79
- (Sheet 14 of 14) 79
- Pin Listing 80
- 5 Signal Definitions 81
- FSB agents 85
- . The processor includes 86
- 6 Thermal Specifications 89
- CASE_MAX 90
- CASE (°C) 91
- = 0.431 x Power + 45 95
- Power (W) 96
- Temperature (C) 96
- 6.1.2 Thermal Metrology 97
- 6.2.2 Intel Thermal Monitor 97
- 6.2.3 Intel Thermal Monitor 2 98
- 6.2.4 On-Demand Mode 99
- 6.2.5 PROCHOT# Signal 100
- 6.2.6 FORCEPR# Signal 100
- 6.2.7 THERMTRIP# Signal 100
- 6.3.1 Introduction 101
- 6.3.1.1 T 102
- 6.3.2.1 PECI Device Address 103
- 6.3.2.2 PECI Command Support 103
- 7 Features 105
- 7.2.2.1 HALT State 106
- 7.2.2.2 Extended HALT State 106
- 7.2.3 Stop-Grant State 108
- 7.3 Enhanced Intel SpeedStep 109
- Technology 109
- Features 110
- 7.4.1 SMBus Device Addressing 111
- Transactions 112
- 7.4.3.1 Header 115
- 7.4.3.2 Processor Data 119
- 0Eh-13h 120
- 7.4.3.3 Processor Core Data 121
- Offset: 1Ah-1Bh 122
- 7.4.3.4 Cache Data 124
- Offset: 29h-2Ah 125
- 2Bh-2Ch 125
- 2Dh-2Eh 125
- 7.4.3.5 Package Data 126
- 7.4.3.6 Part Number Data 127
- 38h-3Eh 128
- 3Fh-4Ch 128
- 4Dh=54h 128
- 55h-6Eh 128
- 71h-72h 129
- 7.4.3.8 Feature Data 130
- 7.4.3.9 OD: Other Data 131
- 7.4.4 Checksums 132
- 7.4.5 Scratch EEPROM 132
- 8 Debug Tools Specifications 133
- Debug Tools Specifications 134
- 9.1 Introduction 135
- 9.2 Thermal Specifications 135
© 2020, manymanuals.com. All rights reserved. | 1.790 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals