Lenovo RS110 User Manual download pdf (Page 39)

8. Place the adapter, component side up, on a flat, static-protective surface and

set any jumpers or switches as described by the adapter manufacturer, if

necessary.

9. Carefully grasp the adapter by its top edge or upper corners and align it with

the expansion slot in the riser card assembly; then, press the adapter firmly

into the expansion slot.

1 Expansion-slot bracket 3 Adapter

2 Tab 4 Adapter bracket

Important: Make sure that the U-shaped opening in the metal adapter bracket

engages the tab on the expansion-slot bracket.

10. Follow the cabling instructions, if any, that come with the adapter.

11. Carefully align the riser-card assembly with the guides on the rear of the server

and with the riser-card connectors on the system board; then, press down on

the assembly. Make sure that the riser-card assembly is fully seated in the

riser-card connector on the system board.

1 Power cable

2 PCI X-slot

Chapter 2. Installing optional devices 25

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 75 76

No comments

Lenovo RS110 User Manual Page 39