Lenovo THINKCENTRE 6019 User Manual download pdf (Page 72)

Diagnostic Error Code FRU/Action

020-199-XXX

PCI test failed, cause unknown

1. Go to “Undetermined problems” on page

80

2. Flash the system and re-test. See

“Updating (flashing) BIOS from a

CD-ROM or diskette” on page 494

3. Replace component under function test

020-262-XXX

PCI system error

1. PCI card

2. Riser card, if installed

3. System board

025-000-XXX

IDE

interface Test Passed

No action

025-00X-XXX

025-01X-XXX

IDE interface failure

1. IDE signal cable

2. Check power supply voltages

3. Reseat IDE signal cable

4. IDE device

5. System board

025-027-XXX

IDE interface Configuration/Setup error

1. IDE signal cable

2. Flash the system. See “Updating

(flashing) BIOS from a CD-ROM or

diskette” on page 494

3. Reseat IDE signal cable

4. IDE device

5. System board

025-02X-XXX

025-03X-XXX

025-04X-XXX

IDE Interface failure

1. IDE signal cable

2. Check power supply

3. Reseat IDE signal cable

4. IDE device

5. System board

025-195-XXX

IDE interface Test aborted by user

Information only

Re-start the test, if necessary

025-196-XXX

IDE interface test halt, error threshold

exceeded

1. Press F3 to review the log file

2. Re-start the test to reset the log file

025-197-XXX

IDE interface test warning

1. Make sure the component that is called

out is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 49

2. Re-run test

3. Replace the component that is called out

in warning statement

4. Replace the component under test

66 Hardware Maintenance Manual

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 505 506

Comments to this Manuals

No comments