Lenovo ThinkServer RD540 User Manual download pdf (Page 35)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 17

Chapter 2. Configuring NIC

This chapter describes the driver and QConvergeConsole (QCC) agent installation, configuration,

operation, and troubleshooting of the NIC function of the 8200 and 3200 Series Adapters. For information

about QCC Agents, refer to the QCC User’s Guide.

Installing NIC in Linux

For information about packaging content, Linux OS support, supported features, driver installation, driver

removal, and driver system parameters, refer to the Ethernet Networking Driver Readme file (Intelligent

Ethernet Adapter and Converged Network Adapter Inbox Driver Update on the QLogic Web site

http://driverdownloads.qlogic.com.

Installing NIC in ESX/ESXi

For information about packaging content, ESX OS support, driver installation, and driver removal, refer to

the Networking Driver Readme file (Intelligent Ethernet Adapter and Converged Network Adapter

Networking Driver for ESX/ESXi) on the QLogic Web site http://driverdownloads.qlogic.com.

Installing NIC in Windows

For information about packing content, Windows OS support, driver installation, and driver removal, refer

to the Ethernet Networking Driver Readme file (Intelligent Ethernet Adapter and Converged Network

Adapter NDIS Miniport Driver for Windows) on the QLogic Web site http://driverdownloads.qlogic.com.

Configuring PXE Boot

This section provides procedures for configuring the 8200 and 3200 Series Adapters to perform PXE boot.

The example uses function 1 and NIC 1.

To configure PXE boot:

1. Enter the system BIOS by pressing the F2 key.

2. On the BIOS window (Figure 3), select Integrated Devices, and then press the ENTER key.

Figure 3: Dell BIOS: Integrated Devices

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 131 132

No comments

Lenovo ThinkServer RD540 User Manual Page 35