Lenovo 560Z User Manual download pdf (Page 115)

Considerations

Using Power Management

Suppose you activate the alarm action as follows:

Notification: Display message

Power level: When the alarm goes off, the computer will Standby.

Now if your computer enters suspend or hibernation mode when the

battery is low before the alarm message appears, you see the

message when the computer resumes. To resume normal operation,

press OK.

Note: You can set the Alarm action as follows:

Start the ThinkPad Configuration program.

Click on Power Management.

Click on the Alarm tab.

Put a check mark in the Low Battery Alarm check box,

the Critical Low Battery Alarm check box, or both.

Set the percentage of the power level.

Click on the Alarm Action... button. You can set the

alarm action in the next window.

Using a PC Card

If you are communicating with a PC Card modem or inserting a PC

Card in a PC Card slot, do not enter your computer into suspend

mode, enter into hibernation mode, or click on Stand by in the “Shut

Down Window” window.

Note: If you want to enter your computer into suspend mode, first

stop the PC Card in the “PC Card (PCMCIA) Properties”

window as follows:

Click on Start, move the cursor to Settings, and click on

Control Panel.

Double-click on PC Card (PCMCIA).

From the list, select the card you are stopping.

Click on the Stop button.

If you remove a communication PC Card from the PC Card slot and

then reinsert it later, it might not work correctly. You need to reboot

your computer.

Chapter 4. Solving Computer Problems 101

Title: C79FPMST CreationDate: 06/22/98 12:26:52

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 188 189

No comments

Lenovo 560Z User Manual Page 115