Lenovo TD100 User Manual download pdf (Page 175)

v Follow the suggested actions in the order in which they are listed in the Action column until the problem

is solved.

v See Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to

determine which components are customer replaceable units (CRU) and which components are field

replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Error code Description Action

178 Security hardware error.

1. Run the Configuration/Setup Utility program,

select Load Default Settings, and save the

settings.

2. Reseat the optional Remote Supervisor Adapter II

SlimLine.

3. Replace the following components one at a time,

in the order shown, restarting the server each

time:

a. Optional Remote Supervisor Adapter II

SlimLine

b. (Trained service technician only) System

board

184 Power-on password damaged.

1. Run the Configuration/Setup Utility program,

select Load Default Settings, and save the

settings.

2. Reseat the battery.

3. Clear CMOS memory. See “System-board

switches” on page 14 for information about how

to clear CMOS.

4. Replace the following components one at a time,

in the order shown, restarting the server each

time:

a. Battery

b. (Trained service technician only) System

board

187 VPD serial number not set.

1. Set the serial number by updating the BIOS code

level (see “Updating the firmware” on page 15).

2. Reseat the optional Remote Supervisor Adapter II

SlimLine.

3. (Trained service technician only) Replace the

system board.

188 Bad VPD CRC #2.

1. Restart the server.

2. Update the firmware (see “Updating the firmware”

on page 15.

3. Reseat the optional Remote Supervisor Adapter II

SlimLine.

4. (Trained service technician only) Replace the

system board.

189 Three attempts were made to access the

server with an incorrect password.

Restart the server and enter the administrator

password; then, run the Configuration/Setup Utility

program and change the power-on password.

Chapter 5. Diagnostics 157

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 253 254

Comments to this Manuals

No comments

Lenovo TD100 User Manual Page 175

Comments to this Manuals