Lenovo T545 User Manual download pdf (Page 16)

1. Turn off your computer and all attached devices.

2. Connect the monitor signal cable to the Video output of your computer

and tighten the thumscrews. Ensure that the connectors align. Do not

force the connectors as this may bend the pins.

3. Connect the power cord. Connect it to the power adapter first insert the

plug into a properly grounded outlet.

1. Switch on the power source to your monitor.

2. Switch on your monitor by pushing and releasing the power switch

marked [ ].

[To switch off your monitor, push and release the power switch again.]

3. Switch on your computer.

4. Run AUTO SETUP by following the instructions in the Auto Setup

section on page 8.

Be sure to read the ‘Safety

Information’ at the front of this

User Guide before carrying out

this procedure.

If you system is equipped

with a digital Video card

using a DVI connector, change

the signal cable to the DVI-D

cable provided (See page 22

for details)

The AC adapter and signal

cable are connected to

your monitor. If you wish to

change these or to fit a

different stand, see Further

Help on page 22.

Connecting your Monitor

Switching on your Monitor

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 58 59

No comments

Lenovo T545 User Manual Page 16