Lenovo IdeaCentre A700 User Manual download pdf (Page 40)

Hardware Maintenance Manual

7. Push out the latches on both sides of the memory socket to release

the memory module and gently pull the memory module upward to

remove it from its socket . Both memory modules can be removed by

using the same procedure.

8. Align then insert the new memory module into the socket and push

down on the top edge of the memory module. Make sure the latches

lock the memory module in place.

9. Align then install motherboard cover back.

10. Install the computer cover and stand.

Replacing connectors module

Attention

Turn oﬀ the computer and wait 3 to 5 minutes to let the computer

cool down before replacing the connectors module.

Note

For this procedure, it helps to place the computer face-down on a

soft ﬂat surface. Lenovo recommends that you use a blanket, towel,

or other soft cloth to protect the touch screen surface from scratches

or other damage.

To replace the connectors module:

1. Remove any media (diskettes, CDs, or memory cards) from the drives,

shut down the operating system, turn oﬀ all attached devices, and the

computer.

2. Unplug all power cords from electrical outlets.

3. Disconnect all cables attached to the computer. This includes power

cords, input/output (I/O) cables, and any other cables that are

connected to the computer. Refer to “Locating connectors on the rear

of the computer”.

4. Remove the computer stand. Refer to “Removing the computer stand”.

5. Remove the computer cover. Refer to “Removing the computer cover”.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 58 59

No comments

Lenovo IdeaCentre A700 User Manual Page 40