Lenovo TS100 User Manual download pdf (Page 127)

3. Install and lock the side cover (see “Installing the side cover” on page 63).

4. Reconnect the external cables and power cords; then, turn on the attached

devices and turn on the server.

Removing the RAID-MR10i SAS/SATA controller

To remove the IBM ServeRAID-MR10i SAS/SATA controller from the server,

complete the following steps:

1. Read the safety information that begins on page vii and “Installation guidelines”

on page 57.

2. Turn off the server and all attached devices; then, disconnect all power cords

and external cables.

3. Unlock and remove the side cover (see “Removing the side cover” on page 62).

4. If you are replacing the ServeRAID-MR10i SAS/SATA controller, disconnect the

signal cables from the controller and the power cable from the power supply;

then, remove the controller from the server.

5. If you are instructed to return the adapter, follow all packaging instructions, and

use any packaging materials for shipping that are supplied to you.

Chapter 4. Removing and replacing server components 109

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 283 284

No comments

Lenovo TS100 User Manual Page 127