Lenovo Computer Monitor 7098 User Manual download pdf (Page 113)

100

101

Replacing the power switch/LED assembly

This procedure describes how to remove and replace the power switch/LED

assembly.

1. Remove cover. See “Removing the cover” on page 89.

2. To access system board components. See “Accessing system board components

and drives” on page 90.

3. Remove the hard disk drive. See “Replacing the hard disk drive” on page 103.

4. Disconnect the power switch/LED assembly cable from the system board. See

the system board illustration for your machine type at “System board

connectors” on page 88.

5. Remove the screw that secures the power switch/LED assembly to the chassis.

6. Note the power switch/LED assembly cable routing and remove the assembly

from the chassis.

7. Route the cable for the new power switch/LED assembly through the hole in

the chassis and to the system board.

8. Install the power switch/LED assembly into the chassis and secure the

assembly with the screw.

9. Connect the power switch/LED cable to the system board.

10. Reinstall the hard disk drive. See “Replacing the hard disk drive” on page

103.

11. Align the drive bay assembly with the two slots and rails on the sides of the

chassis slide the drive bay assembly towards the rear of the chassis until it

snaps into position.

12. Reinstall the front bezel.

13. Go to “Completing the FRU replacement” on page 111.

Chapter 8. Replacing FRUs- Rocky computers 107

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 797 798

Comments to this Manuals

No comments

Lenovo Computer Monitor 7098 User Manual Page 113

Comments to this Manuals

Related products and manuals for Motherboards Lenovo Computer Monitor 7098