Lenovo Computer Monitor 7098 User Manual download pdf (Page 170)

100

101

7. Slide the system board toward the front until it can be lifted out of the

chassis.

8. Remove the heat sink and microprocessor from the failing system board and

install them on the new system board. See “Replacing the microprocessor” on

page 167.

9. Remove the memory modules from the failing system board and install them

into the same position on the new system board. See “Replacing a memory

module” on page 157.

10. Install a new retention module or move the retention module from the failing

system board to the new system board.

11. The failing system board must be returned with a microprocessor socket cover

to protect the pins during shipping and handling. Install the microprocessor

socket cover removed from the new system board on the failing system board.

To install the microprocessor socket cover:

a. Make sure the microprocessor has been removed from the microprocessor

socket, and then close the microprocessor retainer and lock it into position

with the small handle.

b. Insert the tabs 1 of the socket cover into the hinged side of the socket,

and then press the other side of the socket cover downward until the tabs

2 snap into position.

164 Hardware Maintenance Manual

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 797 798

Comments to this Manuals

No comments

Lenovo Computer Monitor 7098 User Manual Page 170

Comments to this Manuals

Related products and manuals for Motherboards Lenovo Computer Monitor 7098