Lenovo RD120 User Manual download pdf (Page 87)

Replacing the CD-RW/DVD drive

To remove the CD-RW/DVD drive, complete the following steps.

1. Read the safety information that begins on page v and “Installation guidelines”

on page 29.

2. Turn off the server and peripheral devices, and disconnect the power cords and

all external cables.

Attention: In a dc power environment, only trained service personnel other

than Lenovo service technicians are authorized to connect or disconnect power

to the dc power supply. See the documentation that comes with each dc power

supply.

3. Remove the cover (see “Removing the cover” on page 31).

4. Press the release tab 1 down to release the drive 2; then, while pressing

the tab, push the drive toward the front of the server.

5. From the front of the server, pull the drive out of the bay.

6. Remove the retention clip 1 and alignment pins 2 from the drive.

install a CD-RW/DVD drive, complete the following steps:

1. Read the safety information that begins on page v and “Installation guidelines”

on page 29.

2. Make sure that the server and peripheral devices are turned off, and that the

power cords and all external cables are disconnected.

Chapter 2. Installing optional devices 73

1 ... 86 87 88 ... 118

No comments

Lenovo RD120 User Manual Page 87