Lenovo Personal Computer 4263 User Manual download pdf (Page 29)

8. Position the new memory module over the memory slot. Make sure that the

notch 1 on the memory module aligns correctly with the key 2 in the

memory slot. Push the memory module straight down into the slot until the

retaining clips close.

9. To install the memory fan duct, engage the rear of the duct with the retainer

on the system board and then pivot the fan duct downward until the fan duct

snaps into position. Reconnect the memory fan cable to the system board. See

“Locating parts and connectors on the system board” on page 11.

10. Reinstall the blue shipping clip if your computer needs to be repackaged and

shipped in the future.

11. Reinstall the optical drive bracket into the chassis if you have removed it.

Then, reinstall the optical drive into the chassis. See “Replacing the optical

drive” on page 29.

12. Reinstall the PCI card holder. See “Removing and reinstalling the PCI card

holder” on page 16.

What to do next:

v To work with another piece of hardware, go to the appropriate section.

v To complete the installation or replacement, go to “Completing the parts

replacement” on page 40.

Figure 14. Installing a memory module

Figure 15. Installing the memory fan duct

Chapter 2. Installing or replacing hardware 21

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 91 92

No comments

Lenovo Personal Computer 4263 User Manual Page 29