Lenovo 3000 C200 User Manual download pdf (Page 30)

Hibernation mode

In hibernation mode, the following occurs:

v The system status, RAM, VRAM, and setup data are stored on the hard disk.

v The system is powered off.

To cause the computer to enter hibernation mode, do any of the following:

v Press the Fn+F12 keys.

v If you are using the ACPI operating system and have defined one of the

following actions as the event that causes the system to go into hibernation

mode, perform that action.

– Closing the lid.

– Pressing the power button.

Also,

the computer goes into hibernation mode automatically in either of the

following conditions:

v If a “hibernation time” has been set on the timer, and if the user does not do

any operation with the keyboard, the hard disk drive, the parallel connector, or

the diskette drive within that time.

v If the timer conditions are satisfied in suspend mode.

When the power is turned on, the computer returns from hibernation mode and

resumes operation. The hibernation file in the boot record on the hard disk drive is

read, and system status is restored from the hard disk drive.

Related service information

24 MT 8922

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 103 104

No comments

Lenovo 3000 C200 User Manual Page 30