Lenovo 3000 C200 User Manual download pdf (Page 50)

To check what ECAs have been previously applied to the machine, use the ECA

Information Read/Write function on the CE Utility Diskette for Lenovo 3000

notebooks.

1. Insert the CE Utility Diskette for Lenovo 3000 notebooks, and restart the

computer.

2. From the main menu, select 6. Set ECA Information.

3. To read ECA information, select 2. Read ECA/rework number from EEPROM

and follow the instruction.

4. To read box build date, select 5. Read box build date from EEPROM, and

follow the instruction on the screen.

After an ECA has been applied to the machine, the EEPROM must be updated to

reflect the ECA's application. Use the CE Utility Diskette for Lenovo 3000

notebooks to update the EEPROM.

Note: Only the ECA number is stored in the EEPROM. The machine type of the

ECA is assumed be the same as the machine type of the machine that had

the ECA applied to it.

1. Insert the CE Utility Diskette for Lenovo 3000 notebooks, and restart the

computer.

2. From the main menu, select 6. Set ECA Information.

3. To write ECA information, select 1. Write ECA/rework number from EEPROM,

and follow the instruction.

4. To write box build date, select 4. Write box build date from EEPROM, and

follow the instruction on the screen.

If the system board is being replaced, try to read the ECA information from the old

system board and transfer the information to the new system. If the system board

is inoperable, this will not be possible.

FRU replacement notices

44 MT 8922

1 ... 49 50 51 ... 104

No comments

Lenovo 3000 C200 User Manual Page 50