Lenovo C200 All-In-One User Manual download pdf (Page 38)

Hardware Maintenance Manual

3. Remove the motherboard cover. Refer to “Removing the motherboard

cover”.

4. Push out the latches on both sides of the memory socket to release

the memory module and gently pull the memory module upward to

remove it from its socket. Both memory modules can be removed by

using the same procedure.

5. Align and then insert the new memory module into the socket and

push down on the top edge of the memory module. Make sure the

latches lock the memory module in place.

6. Screw back the motherboard cover.

7. Install the computer cover and screw back the computer stand.

Replacing the system fan

To replace the system fan

1. Remove the computer stand. Refer to “Removing the computer stand”.

2. Remove the computer cover. Refer to “Removing the computer cover”.

3. Remove the motherboard cover. Refer to “Removing the motherboard

cover”.

4. Disconnect the system fan power cable from the connector on the

motherboard.

5. Remove the 4 screws that secure the system fan to the chassis.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

No comments

Lenovo C200 All-In-One User Manual Page 38