Lenovo 6523 User Manual download pdf (Page 123)

5. Install the eight screws (seven in front and one in rear) that secure the system

board to the chassis.

6. Install any of the following components that you removed from the system

board:

v The fan connector covers.

v Hypervisor key (see “Installing a USB embedded hypervisor flash device” on

page 61).

v Virtual media key (see “Installing the virtual media key” on page 63).

v SAS/SATA controller (see “Installing a ServeRAID BR10-il controller” on

page 91 ).

v Battery (see “Installing the battery” on page 89).

v DIMMs (see “Installing a memory module” on page 38).

v Microprocessor and fan sink (see “Installing a microprocessor and fan sink”

on page 101).

v Adapters (see “Installing an adapter” on page 57).

7. Press and hold the retaining tab on top of the cage; then, rotate the drive cage

into the chassis until it locks into place.

8. Reconnect any cables to the system board that you disconnected during

removal.

9. Install the side cover (see “Installing the side cover” on page 33).

10. Lock the side cover if you unlocked it during removal.

11. Reconnect the external cables and power cords; then, turn on the attached

devices and turn on the server.

Chapter 6. Installing and replacing customer replaceable units 107

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 215 216

No comments

Lenovo 6523 User Manual Page 123