Lenovo ThinkServer TD200 User Manual Page 22
- Page / 120
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1. Log in to the IMM where you want to set the system information. For more
information, see Chapter 2, “Opening and using the IMM Web interface,” on
page 9.
2. In the navigation pane, click System Settings.
Note: The available fields in the System Settings page are determined by the
accessed remote server.
3. In the Name field in the IMM Information area, type the name of the IMM.
Use the Name field to specify a name for the IMM in this server. The name is
included with e-mail and SNMP alert notifications to identify the source of the
alert.
Note: Your IMM name (in the Name field) and the IP host name of the IMM
(in the Hostname field on the Network Interfaces page) do not
automatically share the same name because the Name field is limited to
16 characters. The Hostname field can contain up to 63 characters. To
minimize confusion, set the Name field to the nonqualified portion of
the IP host name. The nonqualified IP host name consists of up to the
first period of a fully qualified IP host name. For example, for the fully
qualified IP host name imm1.us.company.com, the nonqualified IP host
name is imm1. For information about your host name, see “Configuring
network interfaces” on page 28.
4. In the Contact field, type the contact information. For example, you can specify
the name and phone number of the person to contact if there is a problem with
this server. You can type a maximum of 47 characters in this field.
5. In the Location field, type the location of the server. Include in this field
sufficient detail to quickly locate the server for maintenance or other purposes.
You can type a maximum of 47 characters in this field.
6. Scroll to the bottom of the page and click Save.
Setting server timeouts
Note: Server timeouts require that the in-band USB interface (or LAN over USB)
be enabled to allow commands. For more information about the enabling
and disabling commands for the USB interface, see “Disabling the USB
in-band interface” on page 19. For information regarding the installation of
the required device drivers, see “Installing device drivers” on page 71.
To set the server timeout values, complete the following steps:
1. Log in to the IMM where you want to set the server timeouts. For more
information, see Chapter 2, “Opening and using the IMM Web interface,” on
page 9.
2. In the navigation pane, click System Settings and scroll down to the Server
Timeouts area.
You can set the IMM to respond automatically to the following events:
v Halted operating system
v Failure to load operating system
3. Enable the server timeouts that correspond to the events that you want the
IMM to respond to automatically.
OS watchdog
Use the OS watchdog field to specify the number of minutes between
checks of the operating system by the IMM. If the operating system
16 Integrated Management Module: User Guide
- User Guide 3
- Contents 5
- Index ...............109 6
- Chapter 1. Introduction 7
- IMM features 8
- Chapter 1. Introduction 3 9
- Chapter 1. Introduction 5 11
- Notices used in this book 13
- Firmware Setup Utility 15
- Logging in to the IMM 16
- IMM action descriptions 17
- Setting system information 21
- Setting server timeouts 22
- Setting the IMM date and time 23
- Creating a login profile 26
- Deleting a login profile 29
- Configuring port assignments 34
- Configuring network protocols 37
- Configuring SNMP 37
- Configuring DNS 38
- Configuring Telnet 39
- Configuring SMTP 39
- Configuring LDAP 39
- Configuring security 44
- SSL certificate overview 45
- Using the Secure Shell server 51
- Using the configuration file 51
- Restoring defaults 53
- Restarting IMM 53
- Logging off 54
- Viewing system status 55
- Viewing the event logs 58
- Viewing vital product data 61
- Remote presence 64
- Remote control 65
- Remote control screen capture 66
- Remote control mouse support 68
- Single cursor mode 69
- Remote power control 70
- Remote disk 70
- Accessing the Remote Control 71
- Setting up PXE network boot 72
- Updating firmware 73
- Using IPMItool 74
- Chapter 6. LAN over USB 77
- Chapter 6. LAN over USB 73 79
- Managing the IMM using IPMI 81
- Accessing the command line 81
- Command syntax 82
- Features and limitations 82
- Utility commands 83
- Monitor commands 84
- Description 86
- Serial redirect command 87
- Configuration commands 88
- Parameters 94
- IMM control commands 97
- Before you call 101
- Using the documentation 101
- Calling for service 102
- Using other services 103
- Lenovo product service 103
- Appendix B. Notices 105
- Trademarks 106
- Important notes 106
- Appendix B. Notices 101 107
- Hazardous Substances 108
- Battery return program 109
- Appendix B. Notices 105 111
- Appendix B. Notices 107 113
- Printed in USA 120
Related products and manuals for Computer hardware Lenovo ThinkServer TD200
(124 pages)© 2020, manymanuals.com. All rights reserved. | 1.267 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals