Lenovo ThinkServer TD200 User Manual download pdf (Page 87)

Example

system> vpd dsa

Type Version ReleaseDate

---- ------- -----------

dsa D6YT19AUS 02/27/2009

system>

Server power and restart control commands

The server power and restart commands are as follows:

v power

v reset

power command

Syntax

power on

power off [-s]

power state

power cycle [-s]

Description

Use the power command to control the server power. To issue the power

commands, you must have power and restart access authority.

power on turns on the server power.

power off turns off the server power. The -s option shuts down the operating

system before the server is turned off.

power state displays the server power state (on or off) and the current state of

the server.

power cycle turns off the server power and then turns on the power. The -s

option shuts down the operating system before the server is turned off.

reset command

Syntax

reset [option]

option:

-s

Description

Use the reset command to restart the server. To use this command, you must have

power and restart access authority. The -s option shuts down the operating system

before the server is restarted.

Serial redirect command

There is one serial redirect command: console.

console command

Syntax

console 1

Chapter 7. Command-line interface 81

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 119 120

No comments

Lenovo ThinkServer TD200 User Manual Page 87