Lenovo ThinkServer TD200 User Manual Page 34
- Page / 120
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Configuring port assignments
To change the port numbers of IMM services, complete the following steps:
1. Log in to the IMM where you want to configure the port assignments. For
more information, see Chapter 2, “Opening and using the IMM Web interface,”
on page 9.
2. In the navigation pane, click Port Assignments.
3. Use the following information to assign values for the fields:
HTTP This is the port number for the HTTP server of the IMM. The default
port number is 80. Other valid values are in the range 1 - 65535. If you
change this port number, you must add this port number, preceded by
a colon, at the end of the Web address. For example, if the HTTP port
is changed to 8500, type http://hostname:8500/ to open the IMM Web
interface. Note that you must type the prefix http:// before the IP
address and port number.
HTTPS
This is the port number that is used for Web interface HTTPS (SSL)
traffic. The default value is 443. Other valid values are in the range 1 -
65535.
Telnet Legacy CLI
This is the port number for Legacy CLI to log in through the Telnet
service. The default value is 23. Other valid values are in the range 1 -
65535.
SSH Legacy CLI
This is the port number that is configured for Legacy CLI to log in
through SSH. The default is 22.
SNMP Agent
This is the port number for the SNMP agent that runs on the IMM. The
default value is 161. Other valid values are in the range 1 - 65535.
SNMP Traps
This is the port number that is used for SNMP traps. The default value
is 162. Other valid values are in the range 1 - 65535.
Remote Presence
This is the port number that the remote control feature uses to view
and interact with the server console. The default is 3900 for
rack-mounted and tower servers.
The following port numbers are reserved and can be used only for the
corresponding services.
Table 3. Reserved port numbers
Port number Services used for
427 SLP
7070 through 7077 Partition management
4. Click Save .
Configuring network interfaces
On the Network Interfaces page, you can set access to the IMM by configuring an
Ethernet connection to the IMM. To configure the Ethernet setup for the IMM,
complete the following steps:
28 Integrated Management Module: User Guide
- User Guide 3
- Contents 5
- Index ...............109 6
- Chapter 1. Introduction 7
- IMM features 8
- Chapter 1. Introduction 3 9
- Chapter 1. Introduction 5 11
- Notices used in this book 13
- Firmware Setup Utility 15
- Logging in to the IMM 16
- IMM action descriptions 17
- Setting system information 21
- Setting server timeouts 22
- Setting the IMM date and time 23
- Creating a login profile 26
- Deleting a login profile 29
- Configuring port assignments 34
- Configuring network protocols 37
- Configuring SNMP 37
- Configuring DNS 38
- Configuring Telnet 39
- Configuring SMTP 39
- Configuring LDAP 39
- Configuring security 44
- SSL certificate overview 45
- Using the Secure Shell server 51
- Using the configuration file 51
- Restoring defaults 53
- Restarting IMM 53
- Logging off 54
- Viewing system status 55
- Viewing the event logs 58
- Viewing vital product data 61
- Remote presence 64
- Remote control 65
- Remote control screen capture 66
- Remote control mouse support 68
- Single cursor mode 69
- Remote power control 70
- Remote disk 70
- Accessing the Remote Control 71
- Setting up PXE network boot 72
- Updating firmware 73
- Using IPMItool 74
- Chapter 6. LAN over USB 77
- Chapter 6. LAN over USB 73 79
- Managing the IMM using IPMI 81
- Accessing the command line 81
- Command syntax 82
- Features and limitations 82
- Utility commands 83
- Monitor commands 84
- Description 86
- Serial redirect command 87
- Configuration commands 88
- Parameters 94
- IMM control commands 97
- Before you call 101
- Using the documentation 101
- Calling for service 102
- Using other services 103
- Lenovo product service 103
- Appendix B. Notices 105
- Trademarks 106
- Important notes 106
- Appendix B. Notices 101 107
- Hazardous Substances 108
- Battery return program 109
- Appendix B. Notices 105 111
- Appendix B. Notices 107 113
- Printed in USA 120
Related products and manuals for Computer hardware Lenovo ThinkServer TD200
(124 pages)© 2020, manymanuals.com. All rights reserved. | 0.456 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals