Lenovo ThinkServer TD200 User Manual Page 73
- Page / 120
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Updating firmware
Use the Firmware Update option on the navigation pane to update the IMM
firmware, the server firmware, and Dynamic System Analysis (DSA) firmware.
To update the firmware, complete the following steps.
Note: Changes are made periodically to the Lenovo Support Web site. The actual
procedure might vary slightly from what is described in this document.
1. Download the latest firmware update applicable for the server in which the
IMM is installed:
a. Steps - Lenovo support and Downloads and Drivers
2. Log in to the IMM. For more information, see Chapter 2, “Opening and using
the IMM Web interface,” on page 9.
3. In the navigation pane, click Firmware Update.
4. Click Browse .
5. Navigate to the update package that you want to update.
Notes:
a. The server firmware cannot be updated while the server is turned off or
while the server is starting.
b. To determine the type of firmware file to use, see the update package
readme file. In most cases, the IMM can use either the EXE or BIN file to
perform the update.
6. Click Open . The file (including the full path) is displayed in the box next to
Browse.
7. To begin the update process, click Update.
A progress indicator opens as the file is transferred to temporary storage on
the IMM. A confirmation window opens when the file transfer is completed.
8. Verify that the file that is shown on the Confirm Firmware Update window is
what you intend to update. If it is not, click Cancel.
9. To complete the update process, click Continue. A progress indicator opens as
the firmware is updated. A confirmation window opens to verify that the
update was successful.
10. If you are updating the IMM firmware, click Restart IMM in the navigation
pane and then click Restart. The server firmware and DSA updates do not
require that the IMM be restarted. These updates take effect the next time that
the server is started.
11. Click OK to confirm that you want to restart the IMM.
12. Click OK to close the current browser window.
13. After the IMM restarts, log in to the IMM again to access the Web interface.
Resetting the IMM with the Setup Utility
To reset the IMM through the Setup Utility, complete the following steps:
1. Turn on the server.
Note: Approximately 2 minutes after the server is connected to ac power, the
power-control button becomes active.
2. When the prompt F1 Setup is displayed, press F1. If you have set both a
power-on password and an administrator password, you must type the
administrator password to access the full Setup Utility menu.
Chapter 5. Performing IMM tasks 67
- User Guide 3
- Contents 5
- Index ...............109 6
- Chapter 1. Introduction 7
- IMM features 8
- Chapter 1. Introduction 3 9
- Chapter 1. Introduction 5 11
- Notices used in this book 13
- Firmware Setup Utility 15
- Logging in to the IMM 16
- IMM action descriptions 17
- Setting system information 21
- Setting server timeouts 22
- Setting the IMM date and time 23
- Creating a login profile 26
- Deleting a login profile 29
- Configuring port assignments 34
- Configuring network protocols 37
- Configuring SNMP 37
- Configuring DNS 38
- Configuring Telnet 39
- Configuring SMTP 39
- Configuring LDAP 39
- Configuring security 44
- SSL certificate overview 45
- Using the Secure Shell server 51
- Using the configuration file 51
- Restoring defaults 53
- Restarting IMM 53
- Logging off 54
- Viewing system status 55
- Viewing the event logs 58
- Viewing vital product data 61
- Remote presence 64
- Remote control 65
- Remote control screen capture 66
- Remote control mouse support 68
- Single cursor mode 69
- Remote power control 70
- Remote disk 70
- Accessing the Remote Control 71
- Setting up PXE network boot 72
- Updating firmware 73
- Using IPMItool 74
- Chapter 6. LAN over USB 77
- Chapter 6. LAN over USB 73 79
- Managing the IMM using IPMI 81
- Accessing the command line 81
- Command syntax 82
- Features and limitations 82
- Utility commands 83
- Monitor commands 84
- Description 86
- Serial redirect command 87
- Configuration commands 88
- Parameters 94
- IMM control commands 97
- Before you call 101
- Using the documentation 101
- Calling for service 102
- Using other services 103
- Lenovo product service 103
- Appendix B. Notices 105
- Trademarks 106
- Important notes 106
- Appendix B. Notices 101 107
- Hazardous Substances 108
- Battery return program 109
- Appendix B. Notices 105 111
- Appendix B. Notices 107 113
- Printed in USA 120
Related products and manuals for Computer hardware Lenovo ThinkServer TD200
(124 pages)© 2020, manymanuals.com. All rights reserved. | 2.079 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals