Lenovo 6445 User Manual download pdf (Page 59)

Starting the IBM ServeRAID Configuration Utility program

To start the IBM ServeRAID Configuration Utility program, complete the following

steps:

1. Turn on the server.

2. When the prompt <<< Press <CTRL><A> for IBM ServeRAID Configuration

Utility! >>> appears, press Ctrl+A. If you have set an administrator password,

you are prompted to type the password.

3. To select a choice from the menu, use the arrow keys.

4. Use the arrow keys to select the channel for which you want to change settings.

5. To change the settings of the selected items, follow the instructions on the

screen. Be sure to press Enter to save your changes.

IBM ServeRAID Configuration Utility menu choices

The following choices are on the IBM ServeRAID Configuration Utility menu:

v Array Configuration Utility

Select this choice to create, manage, or delete arrays, or to initialize drives.

v SerialSelect Utility

Select this choice to configure the controller interface definitions or to configure

the physical transfer and SAS address of the selected drive.

v Disk Utilities

Select this choice to format a disk or verify the disk media. Select a device from

the list and read the instructions on the screen carefully before making a

selection.

Using ServeRAID Manager

Use ServeRAID Manager, which is on the IBM ServeRAID Support CD, to perform

the following tasks:

v Configure a redundant array of independent disks (RAID) array

v Erase all data from a hard disk drive and return the disk to the factory-default

settings

v View the RAID configuration and associated devices

v Monitor the operation of the RAID controller

perform some tasks, you can run ServeRAID Manager as an installed program.

However, to configure the RAID controller and perform an initial RAID configuration

on the server, you must run ServeRAID Manager in Startable CD mode, as

described in the instructions in this section.

See the ServeRAID documentation on the IBM ServeRAID Support CD for

additional information about RAID technology and instructions for using ServeRAID

Manager to configure the RAID controller. Additional information about ServeRAID

Manager is also available from the Help menu. For information about a specific

object in the ServeRAID Manager tree, select the object and click Actions --> Hints

and tips.

Configuring the RAID controller

By running ServeRAID Manager in Startable CD mode, you can configure the RAID

controller before you install the operating system. The information in this section

assumes that you are running ServeRAID Manager in Startable CD mode.

Chapter 4. Configuring the server 45

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 111 112

Comments to this Manuals

No comments

Lenovo 6445 User Manual Page 59

Comments to this Manuals

Related products and manuals for Servers Lenovo 6445