Lenovo TS200V User Manual download pdf (Page 34)

2. When installing or replacing an option, use the appropriate instructions in this

section along with the instructions that come with the option.

Installing external options

You can connect external options to your server, such as external speakers, a

printer, or a scanner. For some external options, you must install additional

software in addition to making the physical connection. When installing an

external option, see “Front view” on page 11 and “Rear view” on page 12 to

identify the required connector. Then, use the instructions that come with the

option to help you make the connection and install any software or device drivers

that are required for the option.

Removing the server cover

Attention

Do not open your server or attempt any repair before reading and

understanding the “Safety” on page v and the Safety Information book. To

obtain a copy of the Safety Information book, go to:

http://www.lenovo.com/support

This section provides instructions on how to remove the server cover.

CAUTION:

Turn off the server and wait three to five minutes to let the server cool before

removing the server cover.

To remove the server cover, do the following:

1. Remove any media from the drives and turn off all attached devices and the

server.

2. Disconnect all power cords from electrical outlets.

3. Disconnect the power cords, Input/Output (I/O) cables, and any other cables

that are connected to the server. See “Front view” on page 11 and “Rear view”

on page 12.

4. Remove any locking device that secures the server cover, such as a padlock or

an integrated cable lock. See “Integrated cable lock” on page 46 and “Padlock”

on page 47.

5. Remove any thumbscrews that secure the server cover.

18 Installation and User Guide

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 95 96

No comments

Lenovo TS200V User Manual Page 34