Lenovo TS200V User Manual download pdf (Page 47)

9. Press the hard disk drive cage downward until it snaps into position. Make

sure that the hard disk drive cage is secured in the chassis.

10. Continue at “Connecting a SATA drive” on page 27.

Replacing the secondary hard disk drive

Note: Depending on the model type, your server might have a secondary hard

disk drive installed.

To replace the secondary hard disk drive, do the following:

1. Remove all media from the drives and turn off all attached devices and the

server. Then, disconnect all power cords from electrical outlets and disconnect

all cables that are connected to the server.

2. Remove the server cover. See “Removing the server cover” on page 18.

3. Locate the secondary hard disk drive. See “Internal drives” on page 16.

4. Disconnect the signal cable and the power cable from the hard disk drive.

Figure 22. Installing the secondary hard disk drive

Chapter 5. Installing or replacing customer replaceable units 31

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 95 96

No comments

Lenovo TS200V User Manual Page 47