Lenovo THINKSERVER TS100 6434 User Manual Page 76

  • Download
  • Add to my manuals
  • Print
  • Page
    / 110
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 75
Table 11. Abbreviated list of POST error codes (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v See the parts listing in the Hardware Maintenance Manual to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
I9990301 Hard disk drive boot sector error.
1. Reseat the following components,
depending on the server model:
v Hot-swap models:
a. Hard disk drive
b. SAS/SATA controller
v
Simple-swap models:
a. Hard disk drive
b. Hard disk drive cable
2.
Replace the following components one at
a time, depending on the server model,
in the order shown, restarting the server
each time:
v Hot-swap models:
a. Hard disk drive
b. Hard disk drive backplane
c. SAS/SATA controller
v
Simple-swap models:
a. Hard disk drive
b. Hard disk drive cable
3.
(Trained service technician only) Replace
the system board.
I9990650 AC power has been restored.
1. Reseat the power cords.
2. Check for interruption of the external
power.
3. Replace the power cords.
Troubleshooting tables
Use the troubleshooting tables to find solutions to problems that have identifiable
symptoms. See the Hardware Maintenance Manual for more detailed troubleshooting
information. If you cannot find a problem in these tables, run the diagnostic
programs (see “Running the diagnostic programs” in the Hardware Maintenance
Manual).
If you have just added new software or a new optional device and the server is
not working, complete the following steps before you use the troubleshooting
tables:
1. Check the system-board LEDs or the LEDs on the front panel (see
“System-board LEDs” on page 75).
2. Remove the software or device that you just added.
3. Run the diagnostic tests to determine whether the server is running correctly.
62 ThinkServer TS100 Types 6431, 6432, 6433, 6434: Installation Guide
Page view 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 109 110

Comments to this Manuals

No comments