Lenovo THINKSERVER TS100 6434 User Manual download pdf (Page 38)

Table 7. Drive bay IDs for hot-swap SAS/SATA models with four drive bays (continued)

Drive bay ID

5 1

6 2

7 3

If your server is the eight-bay, 2.5 inch hot-swap SAS model, the IDs of the hard

disk drives are shown in the following table.

Table 8. Drive bay IDs for the hot-swap 2.5-inch SAS models with eight bays

Drive bay ID

4 0

5 1

6 2

7 3

8 4

9 5

10 6

11 7

Installing a simple-swap SATA hard disk drive

Some server models support four 3.5-inch simple-swap SATA hard disk drives,

which are accessible from the front of the server. You must disconnect all power

from the server before you remove or install simple-swap drives in the server.

Before you install a simple-swap SATA hard disk drive, read the following

information:

v You can install four simple-swap SATA hard disk drives in the simple-swap

models (7-drive-bay models).

v Install the drives starting from the top bay to the bottom bay (bay 4, 5, 6, and

then 7).

v The four simple-swap SATA hard disk drive connects to the SATA 0 through

SATA 3 connectors on the system board as follows:

– The drive in bay 4 connects to the SATA 0 connector on the system board.

– The drive in bay 5 connects to the SATA 1 connector on the system board.

– The drive in bay 6 connects to the SATA 2 connector on the system board.

– The drive in bay 7 connects to the SATA 3 connector on the system board.

–

Attention: Simple-swap hard disk drives are not hot-swappable. Disconnect all

power from the server before you remove or install a simple-swap hard disk drive.

To install a simple-swap hard disk drive, complete the following steps:

1. Read the safety information that begins on page v and “Installation guidelines”

on page 7.

2. Turn off the server and peripheral devices and disconnect all external cables

and power cords.

24 ThinkServer TS100 Types 6431, 6432, 6433, 6434: Installation Guide

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 109 110

No comments

Lenovo THINKSERVER TS100 6434 User Manual Page 38