Lenovo 6523 User Manual download pdf (Page 126)

Table 14. Server configurations and applications for configuring and managing RAID

arrays (continued)

Server configuration

RAID array configuration

(before operating system is

installed)

RAID array management

(after operating system is

installed)

ServeRAID-MR10i SAS/SATA

Controller (LSI 1078)

installed

MegaRAID Storage Manager

(MSM), MegaRAID BIOS

Configuration Utility (press C

to start)

MegaRAID Storage Manager

(MSM)

Using the Setup Utility

Use the Setup Utility, formerly called the Configuration/Setup Utility program, to

perform the following tasks:

v View configuration information

v View and change assignments for devices and I/O ports

v Set the date and time

v Set the startup characteristics of the server and the order of startup devices

v Set and change settings for advanced hardware features

v View, set, and change settings for power-management features

v View and clear error logs

v Resolve configuration conflicts

Starting the Setup Utility

To start the Setup Utility, do the following:

1. Turn on the server.

Note: Approximately 3 minutes after the server is connected to ac power, the

power-control button becomes active.

2. When the prompt <F1> Setup is displayed, press F1. If you have set an

administrator password, you must type the administrator password to access the

full Setup Utility menu. If you do not type the administrator password, a limited

Setup Utility menu is available.

3. Select the settings to view or change.

Setup Utility menu choices

The following choices are on the Setup Utility main menu. Depending on the

version of the firmware, some menu choices might differ slightly from these

descriptions.

v System Information

Select this choice to view information about the server. When you make changes

through other choices in the Setup Utility, some of those changes are reflected in

the system information; you cannot change settings directly in the system

information.

This choice is on the full Setup Utility menu only.

– System Summary

Select this choice to view configuration information, including the ID, speed,

and cache size of the microprocessors, machine type and model of the server,

the serial number, the system UUID, and the amount of installed memory.

When you make configuration changes through other choices in the Setup

110 ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 215 216

Comments to this Manuals

No comments

Lenovo 6523 User Manual Page 126

Comments to this Manuals

Related products and manuals for Servers Lenovo 6523