Lenovo 6523 User Manual download pdf (Page 83)

4. Thread the cable through the rope clip and around an object that is not part of

or permanently secured to the building structure or foundation, and from which

the cable cannot be removed. Fasten the cable ends together with a lock. After

you add the security cable, make sure that it does not interfere with other

cables that are connected to the server.

If you have other devices to install or remove, do so now; otherwise, go to

“Completing the installation.”

Completing the installation

To complete the installation, you must reinstall the two-piece bezel, reinstall the side

cover, connect all the cables and, for some devices, run the Setup utility. Follow the

instructions in this section.

Reinstalling the two-piece bezel

To reinstall the two-piece bezel, complete the following steps:

1. Install the upper bezel on the front of the server chassis:

a. Insert the two right-side tabs on the upper bezel into the matching holes on

the right side of the chassis.

b. Rotate the upper bezel to the left side of the chassis and press the bezel

clips into the matching indentations on the left side of the chassis until the

bezel clips snap into place 1.

Chapter 5. Installing and replacing optional devices 67

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 215 216

No comments

Lenovo 6523 User Manual Page 83