Lenovo 6523 User Manual download pdf (Page 82)

1 Release lever

2 Hot-swap power supply

2. Using the handle, push the power supply toward the front of the chassis until it

locks into place.

3. Connect one end of the power cord into the connector on the back of the power

supply and connect the other end of the power cord into a properly grounded

electrical outlet.

4. Make sure that both the ac and dc power LEDs on the rear of the power supply

are lit, indicating that the power supply is operating correctly.

Installing a security rope clip

To help prevent hardware theft, you can add a security rope clip and cable to the

server. After you add the security cable, make sure that it does not interfere with

other cables that are connected to the server.

Before you begin, obtain the following items:

v A flat-blade screwdriver

v An adjustable wrench

v A 19 mm (0.75 in.) rope clip or wire rope (similar to National Manufacturing

number 3230, stock number 176-735)

v Threaded nuts that fit the rope clip

v A security cable

v A lock, such as a combination lock or padlock

To install a rope clip 1, complete the following steps:

1. Turn off the server and all attached devices. Disconnect all external cables and

power cords.

2. Use a screwdriver to remove the two metal knockouts.

3. Insert the rope clip through the rear panel; then, attach and tighten the nuts.

66 ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 215 216

No comments

Lenovo 6523 User Manual Page 82