Lenovo RS210 User Manual download pdf (Page 213)

Table 23. System board jumpers (continued)

Jumper number Jumper name Jumper setting

Notes:

1. If no jumper is present, the server responds as if the pins are set to 1 and 2.

2. Changing the position of the UEFI boot recovery jumper from pins 1 and 2 to pins 2 and 3 before the server is

turned on alters which flash ROM page is loaded. Do not change the jumper pin position after the server is

turned on. This can cause an unpredictable problem.

Using the Boot Manager program

The Boot Manager program is a built-in, menu-driven configuration utility program that you can use to

temporarily redefine the first startup device without changing settings in the Setup Utility.

To use the Boot Manager program, do the following:

1. Turn off the server.

2. Restart the server.

3. When the prompt <F12> Select Boot Device is displayed, press F12. If a bootable USB mass storage

device is installed, a submenu item (USB Key/Disk) is displayed.

4. Use the Up arrow and Down arrow keys to select an item from the Boot Selection Menu and press

Enter. The server attempts to boot from the selected device.

The next time the server starts, it returns to the startup sequence that is set in the Setup Utility.

Configuring RAID controllers

The following table lists the various utilities available to configure RAID controllers before an operating

system is installed.

Table 24. RAID configuration utilities

RAID configuration utility Description Location

Where to find more

information

EasyStartup RAID

configuration utility

v For use with all

factory-supported RAID

controllers except

ServeRAID-BR10i

v Automatically detects

hardware and lists all

supported RAID

configurations

v Configures one or more

disk arrays per controller

depending on the number

of drives attached to the

controller and the RAID

level selected

v Supports hot-spare drives

v Creates a RAID response

file that can be used to

configure RAID controllers

on similarly configured

Lenovo servers.

EasyStartup DVD “Using the EasyStartup

DVD” on page 209

Chapter 8. Configuring the server 205

1 ... 212 213 214 ... 244

Comments to this Manuals

No comments

Lenovo RS210 User Manual Page 213

Comments to this Manuals

Related products and manuals for Servers Lenovo RS210