Lenovo 6523 User Manual download pdf (Page 165)

v Follow the suggested actions in the order in which they are listed in the Action column until the problem

is solved.

v See the ″Parts Listing″ section in the Hardware Maintenance Manual to determine which components are

customer replaceable units (CRU) and which components are field replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Error code Description Action

2018002 Option ROM resource allocation failure Informational message that some devices might not

be initialized.

1. If possible, rearrange the order of the adapters in

the PCI slots to change the load order of the

optional-device ROM code.

2. Run the Setup utility, select Start Options, and

change the boot priority to change the load order

of the optional-device ROM code.

3. Run the Setup utility and disable some other

resources, if their functions are not being used, to

make more space available. Select Devices and

I/O Ports to disable any of the integrated devices.

4. Replace the following components one at a time,

in the order shown, restarting the server each

time:

a. Each adapter

b. (Trained service technician only) System

board

3xx0007 (xx

can be 00 - 19)

Firmware fault detected, system halted

1. Recover the server firmware to the latest level.

2. Undo any recent configuration changes, or clear

CMOS memory to restore the settings to the

default values.

3. Remove any recently installed hardware.

3038003 Firmware corrupted

1. Run the Setup utility, select Load Default

Settings, and save the settings to recover the

server firmware.

2. (Trained service technician only) Replace the

system board.

3048005 Booted secondary (backup) server firmware

image

Information only. The backup switch was used to boot

the secondary bank.

3048006 Booted secondary (backup) server firmware

image because of ABR

1. Run the Setup utility, select Load Default

Settings, and save the settings to recover the

primary server firmware settings.

2. Turn off the server and remove it from the power

source.

3. Reconnect the server to the power source, and

then turn on the server.

Chapter 8. Troubleshooting 149

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 215 216

Comments to this Manuals

No comments

Lenovo 6523 User Manual Page 165

Comments to this Manuals

Related products and manuals for Servers Lenovo 6523