Lenovo 6523 User Manual download pdf (Page 93)

1 Release tabs

2 Hard disk drive fan assembly

3 Slot

2. Route the hard disk drive signal and power cables through the slots on the

edge of the hard disk drive fan assembly. Make sure that the cables will not be

pinched between the hard disk drive assembly and the hard disk drive

backplane when the assembly is installed.

3. Rotate the hard disk drive fan assembly toward the backplane. Align the right

edge of the hard disk drive fan assembly and the right edge of the backplane.

Make sure the release tabs are fully engaged on the drive cage.

4. Rotate the drive cage toward the front of the server until it stops; then, lift and

hold the retaining tab 1 on top of the drive cage while you rotate the drive

cage into the chassis until it locks into place.

Chapter 6. Installing and replacing customer replaceable units 77

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 215 216

No comments

Lenovo 6523 User Manual Page 93